OV2640 Camera Module Wide-angle 160-Degree
Spoke with someone via the website chat who was very helpful. I was very impressed with the quality of the servos after having purchased others online from an large online shopping portal which were sub par quality. The servos from lonely binary were 10/10 on quality. Will buy again in a heart beat.
Easy to order online followed by quick delivery. What else can I say? Will definitely check them out for my next project.
Works easily with GPSD on Raspberry Pi and Beaglebone Black. I did upgrade the antennae with a magnetic unit on a long lead.
FS1000A 433MHz RF Wireless Module Assorted Pack
Works perfect. Good price.
Pleased to deal with. Got the items with some more complimentary spares!
Very easy to use with ESP32
ESP32-S3 Type-C PCB Antenna Board
Very good quaility board connections as per arduino standard. Fitted 8874 motor shield , loaded DCC-EX software and ran my train layout , with no problems.
Delivery fast and good communication.
Just for a little epaper project it is a great controller.
Unlike many other dev boards for the ESP32, you don't have to hold down a button to flash. Haven't tried the battery charger, but everything else I have tried works.
Purchased for a DIY marauder project and it's doing what it's supposed to. No issues so far. Cheaper than a pi counterpart and lots of support out there.
This is a good development board. Maxed out flash and RAM. You must use the ESP-IDF development platform to use it. The Arduino world is not really ready for this board yet. The VSCode is a great platform, but it takes a couple of days to figure out how to use the ESP-IDF with it. The ESP-IDF integration with VSCode is a little wonky. Once you learn how to use it though development is fine. Also pay attention to the TTL voltage. ESP32-S3 is not 5V. 5V regulator pin only produces 4.2V. The 3.3V regulator pins are exactly 3.3V. If you need 3.3V and 5V connections TTL level is easily overcome with a bidirectional voltage level shifter, and those are cheap.